Signed in as:
filler@godaddy.com
DYE AND REMOVE SUPPORT
Materials and Hardware
Belong Together
Vortex EZ is our easy-to-use affordable desktop support+dye
Easy to Use, Powerful in Action
Large 450 x 260 x 205 mm basket and a powerful heater for large 3D printed parts and safe,
plug-and-play operation
Outside Dimensions (LxWxH)640 x 370 x 450 mm
Basket Dimension / Maximum Part Size (LxWxH)450 x 260 x 205 mm
Tank Solvent Capacity 11 – 38 Liter
Net Weight Without Solvent22 kg
Adjustable Temperature Range 30 °C – 85 °C
Heat-up Time (38L, 20°C – 70 °C) Approx. 2,5 hours
Recommended Model Materials PA, PU, TPE, Acrylic, Polyester, ABS, ASA, PC, SLA-Resin, … Verify temp
Recommended Support Materials VXL (All Types), PVA, BVOH Recommended DyesTCN Color Dyes
Affordable Device to Dissolve Your Supports
Dissolve Your Supports in 5 Simple Steps
Fill water and Washing Powder
Fill water and Washing Powder
Fill water and Washing Powder
Add tap water and a few spoons of our safe and non - toxic VXL EX washing powder.
place your part
Fill water and Washing Powder
Fill water and Washing Powder
plase your 3d printed part with support structures inside the basket
Set Temperature
Fill water and Washing Powder
Supports will dissolve
Set dissolving Temperature up to 85C depending on the model material and support material you use
Supports will dissolve
Supports will dissolve
Supports will dissolve
Depending on the complexity of your supports, it will take from 30-60 min to dissolve all support structures
Rinse your part
Supports will dissolve
Rinse your part
Remove your parts and rinse off any remains of the washing liquid with tap water.
Congratulations, your part is ready!
Affordable Device to Dye Your 3D Prints
Dye Your 3D Prints in 5 Simple Steps
Add Water and Dye
Add Water and Dye
Add Water and Dye
Add tap water and a few spoons of the safe and non toxic dye
Place your Part
Add Water and Dye
Add Water and Dye
Place your 3d printed part inside the basket. check Tech Specs for part sizes
Set Temperature
Add Water and Dye
The Part Soaks Up The Color
Set dyeing temperature up to 85C depending on the model material you use.
The Part Soaks Up The Color
The Part Soaks Up The Color
The Part Soaks Up The Color
It will take from a few minutes to a few hours to dye your part - depending on the color intensity.
Rinse Your Part
The Part Soaks Up The Color
Rinse Your Part
Remove your part and rinse any remains of the dyeing solution with tap water.
Congratulations, your part is ready!
Contact Us
Better yet, see us in person!
We love our customers, so feel free to visit during normal business hours.
Additive Edge
Hours
Open today | 09:00 – 17:00 |
